PRESSURE JET OIL BURNER
1 .Designed for High / Low and On/Off operations
2. Available for Light and Heavy Fuel Oils
3. Available in Fully Automatic/Semi Automatic/Manual
4. Compact & Proven Design
5. Rugged Construction
6. Simplified Air/Oil Ratio
7. Highly Efficient and reliable
8. Easy and Simplified Maintenance
9. Quick Response to varying loads
1. Steam Boilers
2. Hot Water Boilers
3. Air Heaters
4. Dryers / Ovens
5. Process Heating plants
7. Hot Air Generators
8. Drum Mix Plants
Hi-Therm Boilers has all the technical knowledge you will require for your tailored solution as it has experience as Oil Burner Manufacturers since more than twenty years.
PRESSURE JET OIL BURNER : BURNER HEAD
A series – On/Off model are suitable for low firing capacity. Built-in blower along with oil pump with head makes it a compact model enabling it to used on small air heaters, ovens etc where space is a constraint.
B Series – High / Low/ On/ Off – Model Employs two nozzles and hydraulically operated rapid response of air dampers which regulates the combustion air at each firing rare.. A unique system of hinged type maintenance door gives access to the combustion head for inspection and maintenance. Two stage operation automatically bring the Pressure Jet Oil burner to low fire status once the desired temperature/pressure is attained and regulates output between the high and low fire set points, depending upon the demands of the system.
PRESSURE JET OIL BURNER : BLOWER
The air required for the combustion of fuel oil is provided by the blower. A floor / flange mounted fan provides the air supply for the system. It has a rectangular outlet which is flanged and drilled for bolting onto the Pressure Jet Oil burner head. The air is controlled through a regulator located on the suction side.
PRESSURE JET OIL BURNER : HEATING PUMPING UNIT
HPFU are designed to supply fuel oil to the Pressure Jet Oil burner at a predetermined constant temperature and pressure required for efficient combustion. The principal components are electric heater which is in an immersion type, motorized rotary gear oil pump, oil filters, pressure gauges duly interpiped for the fuel control to the Pressure Jet Oil burner. All the above components are neatly placed and piped on a common base tray making it compact and coordinated space saving design.
PRESSURE JET OIL BURNER : ELECTRICAL CONTROL PANEL
The control panel is built into a free standing/wall mounted cabinet which incorporates a sequence controller, starters for the fan, fuel pump, and heater. All components are prewired, input and output circuits being grouped for ease on onward connection.
TECHNICAL SPECIFICATIONS OF PRESSURE JET OIL BURNER(HIT BURNER)